Setup -29 – Visara UCT-L User Manual
Page 91
Chapter 6. Using TN3270, TN5250, TN5250EP, 1451, VT220 and VT3270
707108-001
6-29
Setup
Communications
• Host – Enter the IP address or DNS (Domain Name Service) name of the AS/400
with which a printer session is to be established.
• Port – Specifies the host port that the Telnet session should use. The default is 23.
• Auto Connect – Enabling this checkbox will establish a printer session with
the AS/400 when the TN5250EP application is run from the Visara Start menu.
Printer
• Scroll window – Used to select a printer. A blue background indicates the printer is
selected.
• Local Name – User-defined name of the printer.
• Remote Name – Queue name that print jobs are sent to from an LPR-enabled device.
• Remote Address – IP address of the selected printer.
Click OK to save changes and exit, or Cancel to exit and discard any changes.