Visara UCT-L - Manual (Page 115)

Chapter 6. Using TN3270, TN5250, TN5250EP, 1451, VT220 and VT3270
707108-001 6-53
• Keyboard Mapper – The key assignment (mapping) may be verified or changed
as necessary for use in VT220 applications.
To determine which key is currently assigned to the VT key, click the appropriate VT
key in the Functions box and the assigned value will be displayed in the Assignments
box. Alternatively, on the keyboard layout, using the mouse click on the key to which
the value needs to be displayed, the key will be displayed in the Functions box and the
assigned value in the Assignments box.
To change the key assignment:
1. Using the mouse click on the key that needs to be changed on the keyboard layout
or alternatively, choose the function from the Functions box.
2. Click Add below the Functions box.
3. Assign the new assignment required for the key selected. If a key combination is
desired, click either the Shift, Control, or Shift + Control buttons.
4. Click Apply when satisfied with selection or click Undo to reassign.
Note: A function can be applied to multiple keys. Assigning a function to a key
does not unassign it from a previous definition.
5. Click OK to save changes and Exit, or Cancel to discard changes and exit. To
return the key assignments to their default state, click Default.