Visara UCT-L - Manual (Page 68)

6-6 707108-001
UCT-L User’s Manual
• Beep Tone - Turn off the beep or select a different tone. You may also select External
in order to sound a beep through speakers connected to the line out port (instead of
the internal beeper).
• Numeric lock – If supported by the TN3270 server, will allow numeric keys only
for numeric fields.
• Typeahead – Enable the Typeahead feature.
• Key Mapper – The key assignment (mapping) may be verified or changed as
necessary for use in TN3270 applications.
Keyboard Mapper
To determine which key is currently assigned to the key, click the appropriate key in the
Functions box and the assigned value will be displayed in the Assignments box.
Alternatively, on the keyboard layout, using the mouse click on the key to which the
value needs to be displayed, the key will be displayed in the Functions box and the
assigned value in the Assignments box.
To change the key assignment:
1. Using the mouse, click on the key that needs to be changed on the keyboard layout or
alternatively, choose the function from the Functions box.
2. Click Add below the Functions box.
3. Assign the new assignment required for the key selected. If a key combination is
desired, click either the Shift, Control, or Shift + Control buttons.
4. Click Apply when satisfied with selection or click Undo to reassign.
Note: A function can be applied to multiple keys. Assigning a function to a key
does not unassign it from a previous definition.
5. Click OK to save changes and Exit, or Cancel to discard changes and exit. To
return the key assignments to their default state, click Default.
Note: TN3270 application must be closed and restarted for changes to become
effective.