Visara UCT-L - Manual (Page 86)

6-24 707108-001
UCT-L User’s Manual
• Lines per page – Specifies the number of Lines per Page to print. Selectable range
is 0-255.
• Line Feed – Sends an immediate Line Feed to the selected printer.
• Form Feed – Sends an immediate Form Feed to the selected printer
• Select Printer – Displays the printer configuration menu.
PSSP
Programmable Setup String for Printer menu provides a mechanism for the user to send
a 16 byte string to the selected printer (locally attached or lpr). This could be used to
select an alternate font or paper source - the capabilities are printer dependent and usually
detailed in your printer manual.
On entry to the menu the currently stored string is displayed, one byte per cell. The 8-bit
values in each cell can be altered either by directly keying a new hexadecimal value into
the cell or using the scroll buttons provided.
• Clear – Set all values to 0.
• Recall – Redisplay the currently stored values.
• On first print only – The string is sent only on the first print since the current
TN5250 session was started.
• On each print – The string will precede each print sent from the TN5250 session.
• Send Now – Sends the string immediately.
Click OK to save changes and exit, or Cancel to discard any changes and exit.