Visara LINCS Configuration - Manual (Page 91)

73
Chapter 3. Line Options
707023-003
PF9-Default
The PF9-Default key adds routes to each of the LINCS LAN cards that are configured for IP
Routing as default entries into the routing table. These default routes do not time out.
TCP/IP Options
TCP/IP Options LINCS C8.2 Central Control
LPD Printer Username _______________________________
LPD Server/Printers Drive: None
SNMP OPTIONS
System Location: ________________________________
________________________________
System Contact: ________________________________________________
System Name: ________________________________________________
TN3270 SERVER OPTIONS
TN3270E: Enable ATTN Key: Disable
SYSREQ Key: Disable 3270 Translate: Disable
Keepalive/Timeout Method: Keepalive using Telnet NOP
Keepalive/Inactivity Timer (min): 05 Disconnect on UNBIND: Disable
TELNET Disconnect on UNBIND: Disable
SESSION MANAGEMENT SYSTEM
SMS Server: None SMS Client: Disable
Poll Rate (secs): 00005
Domain Name: _______________________________________________________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
These parameters apply to all TCP/IP lines. The Miscellaneous LAN Options panel is displayed
if there is at least one LAN line configured with TCP/IP.
The next panel in the forward series is IPX Options.
LPD Printer Username
The LPD Printer Username is used to identify the user who requested an LPD print in LPD
print requests sent to an LPD Print Server, and may be printed on the banner page.
If left blank, it will default to LINCS.
LPD Server/Printers Drive
This field allows you to toggle through the choices of none and all of the hard drives that are
installed, to indicate whether you wish to assign a hard drive as a location to temporarily store
LPD print jobs when LINCS is configured as a LPD Print Server or when supporting LPD
LAN printers.