Visara LINCS Configuration - Manual (Page 197)

179
Chapter 13. Device Options
707023-003
The next panel in the series will be Dynamic Multiplexing Assignments if enabled, or Device
Profiles, if dynamic multiplexing is disabled.
Method of Connection
Each MCC may have a different method for connecting devices. The toggle field choices for
each MCC are as follows:
• Standard - Devices will be connected using one of the following standard methods:
• direct connect each device to CDA ports
• direct connect device to MCC ports
• 8 port multiplexer connected to MCC port
• TWA on 1174-25X only
• 32 Port Coax Multiplexer – connected to port 0 (other ports inactive)
• 32 Port Fiber Optic Multiplexer – connected to port 0 (other ports inactive)
• 32 Port Twisted Wiring Adapter (1174-15X only) – connected to port 0 (other ports
inactive)
• 16 Port MUX on Port 0 & Port 16 – ports 8 and 24 are inactive
• 16 Port MUX on Port 0 – ports 16 and 24 are active for 8-port mux or direct attach
device
• 16 Port MUX on Port 16 – ports 0 and 8 are active for 8-port mux or direct attach device
Dynamic Multiplexing Option
The Dynamic Multiplexing field should be enabled if you wish to attach a multiplexer to a
CDA port. Enabling this option will also result in an additional next panel, Dynamic
Multiplexing Assignments.
Dynamic Multiplexing Assignments
Dynamic Multiplexing Assignments LINCS C8.2 Central Control
Connector Logical
———— ————
00 00 __ __ __ __ __ __ __
01 01 __ __ __ __ __ __ __
02 02 __ __ __ __ __ __ __
. . . . . . . . .
14 14 __ __ __ __ __ __ __
15 15 __ __ __ __ __ __ __
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
The Dynamic Multiplexing Assignments panels are displayed if Dynamic Multiplexing is
enabled on the Coax Multiplexing panel. This feature applies only to models that have a CDA
installed on them, and only applies to the first 32 ports. This feature turns any of the first 32
CDA ports into a port that can support a multiplexer. Any of the first 32 physical ports can be
mapped onto the multiplexer that is to be attached to a port performing dynamic multiplexing