Visara LINCS Configuration - Manual (Page 185)

167
Chapter 12. Network Device Definitions
707023-003
This panel is an example of what you will see if you toggle to LAT Display in the Device Type field.
LAT Service Name
This is a 16 byte alphanumeric field which defines the name of the LAT Display Service
which will be offered to the ports enabled in this Network Device Definition. Valid characters
are alphanumeric, the dollar sign, period, hyphen, and underscore.
LAT displays can connect to one of these ports by specifying the port id and Service Name,
or just the service name.
LAT Service ID
This is an optional field. If defined, this information will be broadcast along with the Service
Name. Up to 16 alphanumeric characters with embedded spaces.
Network Device Definition - TELNET Display
Network Device Definition 002 LINCS C8.2 Central Control
Line ID: ETH1
Device Type: TELNET Display
0 1 2 3
01234567890123456789012345678901
————————————————
Ports: 00000000000000000000000011111111
Ports in other LDDs: 11111111111111111111111100000000
TCP Port: 00023
IP Address or Name: ________________________________
PF: 1-Menu 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
This panel is an example of what you will see if you toggle to TELNET Display in the Device
Type field.
TCP Port
This field defines the TCP Port which TELNET displays will use to connect to port(s) specified
in the LDD (Network Device Definition). If multiple ports are enabled in an LDD, a TELNET
display attempting connection will be assigned the first available LAN port in an LDD that
has a TCP Port matching the requested TCP Port.
IP Address or Name
This field is optional. Use it if you wish to reserve a LAN port for a particular TELNET
Display. This IP Address is the IP Address of that Telnet display. Optionally a Domain
Name can be configured in this field.
Network Device Definition - LPD Printer