Visara LINCS Configuration - Manual (Page 24)

6
LINCS Configuration
707023-003
Main Menu Panel
Main Menu LINCS C8.2 Central Control
Item Description
1 Customization Data Menu
2 Supervisor Functions Menu
3 Media Management Menu
4 Vital Product Data Menu
5 Network Management Menu
6 Device Menu
7 Event Log Menu
8 Communications Menu
Select Item: Depress Enter
The Main Menu panel is the first panel you will see when you enter Central Control Mode.
From this panel you can follow the menu prompts to bring up any Central Control Mode
panel that you need to.
At the “Select Item:” prompt, type the sequence “1/1,u” and press . This will take
you through the Customization Data Menu to select the “Display/Update Configuration”
selection. The next panel to appear will look like this:
Configuration LINCS C8.2 Central Control
Customization Data Source: Default
PF: 1-Menu 10-Process
This panel allows you to select the source of the configuration that you wish to modify. For
a first time configuration, the Customization Data Source is set to “Default”. Other options
that may be selected are to read in a configuration file from “Drive A”, “Drive C”, or “Currently
Loaded”. The “Currently Loaded” and “Drive C” would not be valid offerings on a unit that
has never been configured before. Currently Loaded allows you to modify the configuration
that is currently running (normally used after the first configuration is saved). Selecting
“Default” will bring up the configuration based on the hardware installed in the unit, as if the
unit has never been configured before.
Press to continue into configuration. There are two versions of the resulting
Configuration Menu (Submenu List), depending on whether you are configuring a SCON or
an 1174. Both panels are shown below. Regardless of the model, select item 1 and press
. This should take you to the Product Definition panel.