Visara LINCS Configuration - Manual (Page 140)

122
LINCS Configuration
707023-003
ESCON (SNA) Host Circuit
3270 Host Circuit 0B LINCS C8.2 Central Control
Line: ESC1
Link Profile: SNAHOST (ESCON/SNA)
3270 Host Profile: SNA
Host Identifier: VTAM_DIGS_______
PUID: 00000
CU Index: 00
PU Address: 07
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
ESCON (Non-SNA) Host Circuit
3270 Host Circuit 0B LINCS C8.2 Central Control
Line: ESC1
Link Profile: NSNAHOST (ESCON/Non SNA)
3270 Host Profile: NONSNA
Host Identifier: CONSOLES_____
CU Index: 05
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
Default 3270 Host Circuit
Default 3270 Host Circuit LINCS C8.2 Central Control
Line: ETH1
Link Profile: 08 (TCP/IP)
3270 Host Profile: 00
(other fields based on selected Link Profile type)
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
If the PF3-Def_Dflt function is selected while defining host circuits, a panel similar to this is
displayed. This panel allows you to define a Default 3270 Host Circuit. When a host circuit is
added or defaulted, it will assume the values defined in the default circuit. The panel looks the
same as the host circuit panels described in the previous sections, except for the PF key directives.
• PF3-Return - Pressing this key returns you to the Host Circuit panel that was displayed
prior to entering the Default panel.
• PF4-Cpy_Prof - Copies the Default 3270 Host Circuit to all other circuits.
• PF5-Cpy_Fld - Copies the field occupied by the cursor to all other Host circuits. This
option is not available for the Central Site Change Facility.