Visara LINCS Configuration - Manual (Page 169)

151
Chapter 8. ASCII Port Options
707023-003
ASCII Host Classes
ASCII Host Classes LINCS C8.2 Central Control
ADAA ADAB ADAC ADAD ASCII Session
Class 01234567 01234567 01234567 01234567 Profile Class Name
01 10000000 00000000 00000000 00000000 01 ENGR_VAX
02 01000000 00000000 00000000 00000000 01 ________________
03 00100000 00000000 00000000 00000000 01 ________________
04 00010000 00000000 00000000 00000000 01 ________________
05 00001000 00000000 00000000 00000000 01 ________________
06 00000100 00000000 00000000 00000000 01 ________________
07 00000010 00000000 00000000 00000000 01 ________________
08 00000001 11111111 11111111 11111111 01 ________________
. . . . .
16 00000000 00000000 00000000 00000000 __ ________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
This panel is displayed if any ASCII Hosts are configured on the ASCII Port Options panel. The
column ADAA, ADAB, etc. is the board number, and the numbers below are the port numbers
for that board. A 1 in a port column makes that port a member of this ASCII Host class.
Class
This field shows class numbers. A class is a unique group of one or more ASCII hosts and the
devices that have access to these hosts. There can be up to 16 classes; the numbers are 1
through 16 and are predefined.
ASCII Session Profile
This is the number of the ASCII Session Profile created in the previous panel/step. It is the
default profile for this class, which can be overridden on the end user’s connect panel. The
range is from 0 to 15.
Class Name
This field, which lets you specify a name for the class, must be filled in if any ASCII hosts are
defined. The name could indicate the ASCII host to which the ports in that class are connected
or could identify the host application that is accessible via the host ports. Since there can be
up to 16 classes, each class name must be unique. Class names cannot exceed 16 alphanumeric
characters (including hyphen, period and underscore), and are required.
After configuration, this class name is used on the ASCII Host Connection panel.