Visara LINCS Configuration - Manual (Page 171)

153 707023-003
9. IP Host Classes
IP Host Classes LINCS C8.2 Central Control
ASCII Ses
Class Line IP Address or Name Profile Class Name
----- ---- ------------------- ----------- ----------------
01 FET1 192.155.21.200 01 sulu-telnet
02 FET1 winner.lincs.visara.com___ 02 sweepstakes_____
03 None __________________________ __ ________________
04 None __________________________ __ ________________
. . . .
15 None __________________________ __ ________________
16 None __________________________ __ ________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
The IP Host Classes panel will be displayed if TELNET Host Connections are enabled for
any line.
Class
This field shows class numbers. A class is a unique group of one or more IP hosts and the
devices that have access to these hosts. There can be up to 16 classes; the numbers are 1
through 16 and are predefined.
Line to IP Host
Enter the line which will be used to connect to the IP Host(s) in this IP Host Class.
IP Address or Name
Enter a four-octet decimal number for the IP address of the remote IP Host or enter the Domain
Name of the remote IP host. The IP address should be a uniquely assigned value given to the
remote device by the network administrator. It needs to follow the guidelines of any IP address
assignment, four octets separated by dots. If a Domain Name is used, you should have an
address configured in the TCP/IP Options (Line Options panel) for the DNS Server in order
for LINCS to get the Domain Name resolved.
ASCII Session Profile
This is the number of the ASCII Session Profile created in the previous panel/step. The range
is from 0 to 15.
Class Name
This field, which lets you specify a name for the class, must be filled in if any IP hosts are
defined. The name could indicate the IP host to which the ports in that class are connected or
could identify the host application that is accessible via the host ports. Since there can be up
to 16 classes, each class name must be unique. Class names cannot exceed 16 alphanumeric
characters (including hyphen, period and underscore), and are required.
After configuration, this class name is used on the IP Host Connection panel.