Visara LINCS Configuration - Manual (Page 186)

168
LINCS Configuration
707023-003
Network Device Definition 004 LINCS C8.2 Central Control
Line ID: ETH1
Device Type: LPD
0 1 2 3
01234567890123456789012345678901
————————————————
Ports: 00000011000000000000000000000000
Ports in other LDDs: 11111100111111111111111111111111
IP Address or Name: 193.251.083.203
Queue Name: LASER
Limit Source TCP Port: Enable
Print Banner: Disable
Retry Count: 005
Retry Interval (sec): 060
Feature Memory (K): Disk
Print Failure Action: Delete Print Job
PF: 1-Menu 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
This panel is an example of what you will see if you toggle to LPD in the Device Type field.
Line ID
This field toggles through all LAN lines. Select the line to which the LPD printer is attached.
IP Address or Name
This field contains the IP address of the host computer where the LPD print server resides, to
which LINCS will be directing prints to. Optionally, you may code in a Domain Name instead
of an IP address. When using a Domain Name, make sure that you have configured an IP
address for the Domain Name Server, on the Line Options - TCP/IP Options panel.
Queue Name
This queue is where print files will be queued that are destined for the LPD printer. The
queue can reside on a host or a LINCS LPD print server. The queue name can be up to 16
alphanumeric characters.
Limit Source TCP Port
The Limit Source TCP Port field limits the range of source TCP ports that may be used for
LPD print jobs.
ENABLE limits the range of available TCP ports to 721 through 731, as required by some
LPD servers. If there are eleven active LPR sessions using all the TCP ports between
721 and 731, then any new print requests on a LPD device will be refused.
If this field is set to DISABLE, then the source TCP port can be any unused TCP port.
Print Banner