Visara LINCS Configuration - Manual (Page 174)

156
LINCS Configuration
707023-003
This panel will be displayed if LAT connections are configured for any Ethernet board. The
Identifier Control List refers to outgoing connections. The Access Control List refers to
incoming LAT connections. The purpose of the Control List is to indicate access authorization.
For example, if a server indicates access authorization of 12 is required, only LAT clients
configured with an authorization level of 12 will have access to that server resource. If LAT
Groups are not being used on the network, then a default Group 00 is assumed. The default
setting for LINCS for both the Identifier and Access groups has Group 00 turned on for this
reason.
Identifier Control List
The Identifier Control List identifies which LAT Groups, coax users on the 1174 will have
access to on the network.
Access Control List
The Access Control List identifies which LAT Groups LINCS will require LAT clients to be
part of. A minimum configuration of Group 00 is required.