Sundance SMT390-VP - Manual (Page 52)

Version 2.4 Page 52 of 55 SMT390-VP User Manual
How to interconnect SMT390 and SMT338-VP on a carrier board?
The example shown is below is for an SMT8090_374 (SMT8090_365) system, which
is a SMT374 (SMT365) and an SMT390 on an SMT310Q carrier board.
The following diagram shows both boards. The SMT338-VP has got 4 holes, as well
as the SMT390, the usual two TIM Mounting holes to provide the module with 3.3
Volts and two extra holes, smaller.
Top Primary TIM Connector
Bottom Primary TIM Connector
SHB
B
SHB
A
RSL
B
RSL
A
Po
w
e
r
SMT390
TIM 3.3V
TIM 3.3V
Holes mounted with
Nylon screw (M2x10) and
4 Nylon nuts (M2)
SMT338-VP
Holes mounted with
Nylon screw (M2x10) and
4 Nylon nuts (M2)
Figure 38 - SMT390 to SMT338-VP Interconnections.
Here is what is required to mount SMT338-VP+390 on the SMT310Q:
Figure 39 – Fixings