Sundance SMT390-VP - Manual (Page 2)

Version 2.4 Page 2 of 55 SMT390-VP User Manual
Revision History
Date Comments Engineer Version
05/02/04 Preliminary version. PSR 0.9
19/02/04 Trigger characteristics added – SHB Location
corrected.
PSR 1.0
18/03/04 Details about clock synthesizer configuration.
Dimensions added. MTBF Added
PSR 1.1
29/03/04 Details on how to connect SMT390 to
SMT338VP
PSR 1.2
01/04/04 Update temperature and serial number
registers
PSR 1.3
19/05/04 Update Configuration sequence and power
connector pinout (JTAG lines were missing)
PSR 1.4
25/05/04 Changed title to SMT390-VP
Update Register Description section:
- Trigger
Register
- Decimation
Register
-
ADC over range register
SHB and ComPort sections updated
JPA 1.5
15/06/04 Removed MemoryBypass Mode.
Updated registers section.
RSL are not available.
Updated ADC Setup Control Register.
Added Firmware description section.
Added Setting-up an acquisition section.
Added Configuring the FPGA section.
JPA 1.6
28/06/04 Review and minor changes added PSR 1.7
14/07/04 ADC and External clock schematics added –
Module temperatures added – FPGA usage
added
PSR 1.8
24/03/05 Due to complete recoding of the
microcontroller code the serial number feature
has been removed. Also correction of the
interface between the microcontroller and the
FPGA.
E.P 1.9