Sundance SMT390-VP - Manual (Page 27)

Version 2.4 Page 27 of 55 SMT390-VP User Manual
RSL Cable Definition
The matching cable for the RSL connector is a Samtec High Speed Data Link Cable
(Samtec HFEM Series). The cable may be ordered with different length and mating
connector options. The following diagram shows such a typical cable:
Figure 13 – Samtec HFEM Series Data Cable.
SHB
The SMT390-VP implements a subset of the full SHB implementation. Two
configurations are possible
1. SHB A is configured to transmit 16-bit data words by the way of two
independent interfaces. The first half of the connector is dedicated to Channel
A and the second half to Channel B. Both interfaces are clocked at 53MHz.
This configuration isn’t available at the moment.
2. SHB A and SHB B are both configured to transmit 32-bits data words. Note
that SHB A is dedicated to ADC Channel B and SHB B to ADC channel A.
SHB interface is clocked at 53MHz.