RGBLink VENUS X1 User Manual - Manual (Page 95)

6. System Setup and Operations
How to Realize Single Image Switching
VENUS X1 User Manual 95
How to Realize Single Image Switching
System default DVI to the current input source, if need seamless switching
other source such as VGA, push the VGA button, OLED module show as
follows:
DVI button light turns off after pushing VGA button. VGA button light will be
on if the VGA signal is effective and stable. And if the VGA signal is invalid
or no input, VGA button light will flash.
The same method can switch the signals among CVBS, HDMI and optional
input signal.
SOURCE SELECT:
>DVI SOURCE SELECT:
->VGA