RGBLink VENUS X1 User Manual - Manual (Page 115)

6. System Setup and Operation
How to Save the Parameter
VENUS X1 User Manual 115
How to Save the Parameter
VENUS X1 provides 36 save preferences, operations are as follows:
1. Push the [SAVE/1] button, the button light is on, and enable the SAVE
function.
2. Turn the knob, and choose the position that will save, push the knob
to confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 down of the buttons means
SAVE1~10, user can push any button on to save. For example, save to
SAVE 2, push button 2, the OLED panel will show as follows after
saving.
4. Push the [SAVE/1] button again, the button light is off, and disable the
SAVE function.
SAVE TO
->SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
->SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite