beautypg.com

There is flash point when output to the led screen, Change the dvi cable, Change the dvi output port – RGBLink VENUS X1 User Manual User Manual

Page 119: Common questions and solutions

background image

7. Common Questions and Solutions

VENUS X1 User Manual 119

video processors. Choose fixed split or normal split, and open the split

function.

1. FIXED SPLIT: Set the horizontal split and vertical split according to

actual need.

2. NORMAL SPLIT: Set the H TOTAL, V TOTAL, H POS, V POS, H SIZE

and V SIZE according to actual need. User can do the quick split only

need setting three groups of the parameters.

There is Flash Point when Output to the LED Screen

Change the DVI Cable

There is flash point on LED display when input sending card. This is

because the DVI cable quality of good and bad are intermingled. Please

change the DVI cable and test again.

Change the DVI Output Port

The DVI output port is loose or oxidation due to plug and pull frequently or

long time no use, which may cause the signal attenuation. There are two

DVI output ports on VENUS X1, please change to the other DVI output port

and test again.