RGBLink VENUS X1 User Manual - Manual (Page 62)

4. Menu Orientation
QUICK MENU
VENUS X1 User Manual 62
Note
Function reuse key [SPLIT], select image A or
image B.
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can
switch IMAGE A and IMAGE B.
ALPHA: Use can set the image transparency, the regulating range is
among 0 to 16.
For details, please refer to the instructions in the manual: How to Set up the
PIP.
SPLIT FUNCTION
Push the [SPLIT] button, the button led light turn on, and enter the SPLIT
function menus. The split modes include and
SPLIT>.
FIXED SPLIT: Sub menus are as follows:
SPLIT: Split function, can choose ―ON‖ or ―OFF‖. System default ―OFF‖.
HORIZONTAL SPLIT: Horizontal fixed split, choose it and push the number
button to set the total horizontal screen number.
VERTICAL SPLIT: Vertical fixed split, choose it and push the number button
to set the total vertical screen number.
SPLIT INDEX: Use can choose the split index, and the LED display will
show the corresponding image.
NORMAL SPLIT: For normal split, user should enable the split function, that
is, turn the knob, and set the
T> as ―ON‖, push the knob to confirm.
System default ―OFF‖. User can set the normal split in the sub menus:
SPLIT: Split function, can choose
―ON‖ or ―OFF‖.
H TOTAL: The total width points of LED display that will split.
V TOTAL: The total height points of LED display that will split.