RGBLink VENUS X1 User Manual - Manual (Page 112)

6.
System Setup And Operation
How to Realize LAN Remote Control Settings
VENUS X1 User Manual 112
How to Realize LAN Remote Control
Settings
Firstly, to realize LAN remote control need to build up a LAN platform including: ①One
computer (Laptop or computer, used to do remote control which installed windows control
software in the computer, please refer to software installing part for installation software).
②One router (Better to have wireless function which may realize WEB control cross
different platform, without wireless function is available but only realize cable remote
control. No limitation for router
’s model and brand, such as VPN router model: Netcore
255 or 266; Volans VE 760W or 982W). ③One VENUS X1 processor (as long as the
router ’s network ports can connect to, user can place multi pieces of VENUS X1).
Step one: LAN physical connection. Connect VENUS X1 and router with network cable,
then connect computer and router with network cable also, use the LAN port of router,
LAN port is used for connecting to outer net. Sketch map as below:
Step two: IP address setting (processor ’s default IP address is 192.168.0.100)
Firstly change computer
’s local connection to ―automatically getting the IP‖, showed as
below: