RGBLink VENUS X1 User Manual - Manual (Page 56)

4. Menu Orientation
MENU
VENUS X1 User Manual 56
there are no signal output, it needs to input password and modify the using
time to continue to work.
HOT BACKUP: User can enable or disable the hot backup function.
Choose ―ON‖ to set the backup signal for BACKUP_1 to BACKUP_5. It will
switch to the backup signal if interrupt signal.
FAN CONTROL: User can enable or disable the auto speed function, set
the current speed and view the current temperature.
DEVICE STATUS: Show the video status, MB status and EXT status.
USER DEFINED BUTTON: User can define the BLACK and SCALE key.
BLACK KEY: System default black function. Push the button, its LED light
turns on, the output will be switched to black, push the button again, its
LED light is off, and output the video image.
Besides BLACK, user can define this button as FREEZE, TEST PATTERN
and BRIGHT.
If define this button as FREEZE, push the button, its LED light turns on, and
freeze the image. Push the button again, its LED light is off, and output the
video image.
If define this button as TEST PATTERN, push the button, its LED light turns
on, the output will be switched to test pattern. Push the button again, its
LED light is off, and output the video image.
If define this button as BRIGHT, push the button, its LED light turns on,
user can adjust the brightness, contrast, saturation, sharpness, color red,
color green, color blue and gamma. If image quality distorts by improper
operation, it can be recover by reset.
For more details, please refer to: How to User Define the BLACK Key .
SCALE KEY: System default scale function. Push the button to enter the
scale menus. Turn the knob to select the relevant submenus.
Besides SCALE, user can define this button as TAKE.
If define this button as TAKE, push the button, its LED light turns on,