RGBLink VENUS X1 User Manual - Manual (Page 89)

5. Communication Software Control Guide
How to Connect Windows Control Program by LAN Interface
VENUS X1 User Manual 89
How to Connect Windows Control
Program by LAN Interface
First, install the windows control software to the control computer;
Connect VENUS X1 and computer with cable, the connection diagram is
as follow:
Power on VENUS X1 and start the network function, specific steps as
below:
The first step: push MENU button, login MENU —SYSTEM—ETHERNET，
check the IP address of the equipment, the equipment factory default IP
address : 192.168.0.100.
The second step: check computer IP address:
Click start, then press button Run ，
Enter ,then click< ok> ，
Enter