RGBLink VSP 3550S Quick Start User Manual
Quick start, View size the world, Vsp 3550
VSP 3550 –
Quick Start
Installation and cabling features
Rear Panel
Connections
1
2
VGA Input
6
Step 1-Mounting
Turn off or disconnect all equipment power sources.
Step 4-DVI Input
Used to input DVI signal from DVI
player or computer with DVI connector.
VSP 3550 Quick Start
Rev 1.0
Page 1 of 4
CVBS Input
USB Interface
8
9
10
11
10/100M Interface
Push button switch
Step 3-CVBS Input
Composite video input (BNC connector).
Support composite signal include: PAL,
NTSC,SECAM.
NOTE
This guide provides quick start instructions for an experienced installer
to set up and operate the VSP 3550.
For full installation, configuration, and operation details, please refer to
the VSP 3550 user manual, which is available at
5
SDI Input
SDI Loop Out
Step 8-DVI Loop Through Output
Can connect the device with DVI
input or DVI monitor.
7
RJ11(RS232) Interface
Step 2-SDI Input
Standard BNC connector, support
3G/HD/SD-SDI.
Step 7-SDI Loop Through Output
Standard BNC connector, can connect
the device with SDI input or SDI
monitor.
Step 5-VGA Input
Used to input VGA signal from VGA
player or computer with VGA connector.
HDMI Input
4
3
15
12
DVI Input
13
DVI Loop Out
23
Power interface
14
16
17
22
DVI Preview Out
VGA Preiew Output
Step 10-DVI Output
Step 9-VGA Preview Output
Connect to the monitor or LED screen
which has DVI interface.
Can connect the device with VGA
input or VGA monitor.
VIEW SIZE THE WORLD
Address: S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone, Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected]
18
20
19
21
Power Switch
DVI Input (4K×1K)
DVI Ouput
Step 6-HDMI Input
HDMI-A interface, can be compatible with
HDMI inputs.
Step 11-10/100M interface
Used to connect the computer or console.
Support the speed of network connection
with 10M or 100M.
Step 12-RS232 interface
Used to connect the computer or console.