How to load the saved parameter, How to load the saved, Parameter – RGBLink VENUS X1 User Manual User Manual

Page 116: How to load the, Saved parameter, System setup and operation

6. System Setup and Operation

How to Load the Saved Parameter

VENUS X1 User Manual 116

VENUS X1 provides 36 save preferences, operations are as follows:

1. Push the [LOAD/6] button, the button light is on, and enable the LOAD

function.

2. Turn the knob, and choose the position that will load, push the knob to

confirm.

3. Push the [LOAD/6] button again, the button light if off, and disable the

LOAD function.

RECALL SAVE
->SAVE 1

Button on is ready for recall

Button flashes means just recall