RGBLink VENUS X1 User Manual - Manual (Page 105)

6. System Setup and Operation
How to Realize the Text Overlay Setting
VENUS X1 User Manual 105
button, and push [SCALE] button to adjust the size and
position of VGA image, then set the VGA image to the required position.
The standard position and size is: ensure the VGA image overlay on the
DVI image, display normally and without black edges. If there are black
edges around VGA image, choose option in to
adjust.
6. Set the text overlay mode: choose option in
OVERLAY>, push the knob to enter into the menu items.
Turn the knob to choose the preset mode, for example, set the VGA text
as WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only
support monochrome subtitles), user can also adjust the
MODE> or to get a better effect.
7. Push the [SAVE/1] button to save the above parameters.
->
H SIZE
1920
V SIZE
1080
H/V SIZE
0
H POS
0
->
V POS
0
RESET
TEXT OVERLAY ON
->PRESET WhOnBk2
BLEND MODE MODE1
BLEND LEVEL 0