RGBLink VENUS X1 User Manual - Manual (Page 130)

VENUS X1 User Manual 130
D. O ptional Module Installation and
Replacement Instruction
VENUS X1 is based on replaceable input optional modules structure, user can install
or replace the optional module according to actual need, specific steps are as follows:
Install the Optional Module
1. Unscrew the 2 captive screws in input modules block, and pull out the input module
block, as shown in figure:
2. Fix the input EXT board and input modules on the plate with the fixed screws, as
shown in figure:
Captive Screw