RGBLink VENUS X1 User Manual - Manual (Page 118)

7. Common Questions and Solutions
VENUS X1 User Manual 118
Input Jitter for I System of HDMI
Change the Input as P System
Some HDMI input of VENUS X1 will jitter for the I system of HDMI, please
change the input as P system.
Connect the HDMI Signal to the EXT_HDMI
Input
If user can’t change the input format as P system, please connect the I
system signal to the EXT_HDMI input.
DVI Quick Split Operation
The split function of VENUS X1 is only available for DVI port (standard) and
HDMI loop out port of EXT_9.
It Needs Signal Distributor if Split by DVI Port
If split by the standard DVI port, it needs the signal distributor to achieve
the synchronization cascade, as there is no DVI loop.
Split by the HDMI Loop Out Port of EXT_9
User can split by the HDMI loop of EXT_9, as there is loop out port on this
module.
Quick Split
Connect all the inputs and outputs, then push the [SPLIT] buttons on all the