RGBLink VENUS X1 User Manual - Manual (Page 36)

2. Hardware Orientation
VENUS X1 Front Panel
VENUS X1 User Manual 36
the PIP function, and change to the single image. OLED shows as follows:
For details, please refer to PIP function and How to Set up the PIP
.
Note
VENUS X1 V1.1 can not support DSK function
button.
Full size and screen size reuse button. Push the button, its LED light turns
on, the image is screen size display, push the button again, the image will
full size display.
When connect USB signal, it reused the move previous button, push the
button to play the previous USB video file.
Split function button: push the button, its LED light turns on, OLED menu
shows as follows:
Turn the knob, and choose the split mode, for example, choose
SPLIT>, push the knob to confirm. Turn the knob, and set the as
―ON‖, push the knob to confirm. The [SPLIT] button light turns on, and
enable the split function. OLED menu shows as follows:
— >PIP ON
LAYOUT PIP L+T
SELECT IMAGE A
SWAP IMAGE OFF
—>FIXED SPLIT >>
NORMAL SPLIT >>
— >ALPHA 0