RGBLink VENUS X1 User Manual - Manual (Page 55)

4. Menu Orientation
MENU
VENUS X1 User Manual 55
Note
User can also push the [LOAD/6] button to recall
the saved parameters.
DELAY CALL: Set delay the output time. When more than one equipment
power on, and the processor is the end equipment in order to improve
question that can
’t identify the input signal and phenomenon that LED
screen appear messy code and flash screen, now need to delay the input
time.
REAL-TIME SAVE: User can enable or disable the real-time save function,
the device wil l automatically save the modified parameters if choose ―ON‖.
SYSTEM
Push the [MENU] button to go into the menu items, turn the knob button to
select , show menus as follows:
SN: Show the serial number of the device.
VERSION: Show the COM version, firmware version, mainboard version,
EXT mainboard version, EXT INPUT1 version and EXT INPUT2 version.
TECH SUPPORT: Show the sales, customer service, email, website and
telephone.
DATE&TIME: User can view and change the date and time, view the
current time, last time, total time and boot times.
ETHERNET: Network setting, include IP address, subnet mask and
gateway. System default IP address is 192.168.0.100, subnet mask is
255.255.255.000, gateway is 192.168.000.001.
LOCK FRONT PANEL: Through this setting can choose whether to lock
the keys, if the key is locked, the equipment will remind: "Buttons are
locked! Press MENU key and hold 5s to release!"
LICENSE SETUP: The device will not work if excess the prescribed time,