How to realize the text overlay setting, System setup and operation – RGBLink VENUS X1 User Manual User Manual

Page 104

6. System Setup and Operation

How to Realize the Text Overlay Setting

VENUS X1 User Manual 104

Before setting the text overlay, please make sure the input channel of the

text. For example, set VGA input as the text channel. Then make sure the

channel that the text will overlay, for example, overlay the text on DVI

channel. The operations are as follows:

1. Push the VGA button to make sure there is VGA input.

2. Push the DVI button to make sure there is DVI input.

3. Push the [MENU] button, turn the knob, choose , push the

knob to confirm, turn the knob, and choose , push

the knob to confirm.

Then enter into TEXT OVERLAY menu items, turn the knob, and

choose , push the knob to confirm, turn the knob

again, and choose ―ON‖ to enable the text overlay function.

4. Make sure VGA input is IMAGE B, and DVI input is IMAGE A, if not,

choose option by push [PIP/DSK] button, and

choose ―ON‖ for .

Choose the VGA image in ―IMAGE B‖ in