OpenEye CM-410 - Manual (Page 39)

28561AA 29
SWING SETUP
SWING SETUP
------------------------
SWING NO. 1
1ST POS. NOT USED
2ND POS. NOT USED
SWING SPEED 30/SEC
CLEAR SWING CANCEL
BACK
EXIT
Swing Number [1~8]
Select Swing number to edit. If a selected Swing is not
defined, "NOT USED" is displayed in 1st Position and 2nd
Position
1st Position
2nd Position [PRESET 1~128]
Set up the 2 position for Swing function. If a selected
preset is not defined, "UNDEFINED" will be displayed as
shown below.
SWING SETUP
------------------------
SWING NO. 1
1ST POS. PRESET5
2ND POS. NOT USED
UNDEFINED
When swing function runs, the camera will move from the
preset assigned as the 1st point to the preset assigned as
the 2nd point in a CW (Clockwise) direction. Then the
camera will move from the preset assigned as the 2nd
point to the preset assigned as the 1st point in a CCW
(Counterclockwise) direction. If the preset assigned as the
1st point is same as the preset assigned as the 2nd point,
the camera will turn 360
° in CW direction and then turn
360 ° in CCW direction.
Swing Speed [1 °/sec ~180°/sec]
Sets Swing speed from 1 °/sec to 180°/sec.
Clear Swing [CANCEL/OK]
Deletes current Swing data.