OpenEye CM-410 - Manual (Page 34)

24 28561AA
CAMERA SETUP
ZOOM CAMERA SETUP
------------------------
FOCUS MODE SEMIAUTO
DIGITAL ZOOM ON
LINE LOCK OFF
BACK
EXIT
Setup the general functions of zoom camera module.
Focus Mode [AUTO/MANUAL/SEMIAUTO]
Sets camera focus mode.
SEMIAUTO Mode
Automatically selects focus mode from Manual Focus or
Auto Focus depending on type of operation. Manual Focus
mode activates in preset operation and Auto Focus mode
activates during jog operation. In Manual mode, Focus
data for each preset is memorized in advance, and the
camera calls focus data for corresponding presets as soon
as it arrives at a preset.
Digital Zoom [ON/OFF]
Sets digital zoom function to ON/OFF. When set to OFF,
optical zoom function runs but zoom function stops at the
end of optical zoom magnification.
Line Lock [ON/OFF]
If Line lock sync is ON, video signal is synchronized with
AC power. Video can be fluctuated after setting is
changed.
WHITE BALANCE
WB SETUP - GLOBAL
------------------------
WB MODE AUTO
RED ADJUST ---
BLUE ADJUST ---
BACK
EXIT
WB Mode [AUTO/MANUAL]
In Manual mode, Red and Blue level can be set up
manually
Red Adjust [10~60]
Blue Adjust [10~60]