OpenEye CM-410 - Manual (Page 14)

4 28561AA
PART NAMES AND FUNCTIONS
Main Unit / Surface Mount Bracket Back of Main Unit
Dome Cover
Do not remove protective vinyl from dome cover before finishing all installation processes to protect
dome cover from scratches or dust.
Surface Mount Bracket
Used to install the camera directly on the ceiling. Separate the cover first and then attach it directly to
ceiling. Camera must be assembled at the last stage.
Do not use this bracket when installing camera on the wall with wall mount bracket or on the ceiling
with ceiling mount bracket.
Lockup Screw Fixes main unit to surface mount bracket.
Cabling Terminal Block
During installation, Power, Video, Communication, Alarm Input cables are connected on to this cabling
terminal block.
Safety Retention Spring Pull out from Surface Mount Bracket and connect to Main Body hook.
DIP Switch Adjusts camera ID and protocols.
DIP Switch
Cabling
Terminal Block
Surface Mount Bracket
Mounting Hole
Safety Retention Spring
Main Body
Lock-up Screw
Dome Cover