OpenEye CM-410 - Manual (Page 32)

22 28561AA
HOW TO USE THE OSD MENU
GENERAL RULES OF KEY OPERATION FOR MENU
• The menu items surrounded with ( ) always have a sub menu.
• At all menu levels, to go into sub menu, press the FOCUS NEAR key.
• To go to up one menu level, press the FOCUS FAR key.
• To move from items to item in the menu, use joystick in the Up/Down or Left/Right.
• To change a value of an item, use Up/Down of the joystick in the controller.
• Press the FOCUS NEAR key to save values and Press the FOCUS FAR key to cancel values.
MAIN MENU
SPEED DOME CAMERA
------------------------
EXIT
System Information Displays system information and configuration.
Display Setup Enable/Disable of OSD display on Main Screen.
Dome Camera Setup Configure various functions of this camera.
System Initialize Initializes system configuration and sets all data to factory
default configuration.
DISPLAY SETUP
DISPLAY SETUP
------------------------
CAMERA ID ON
PTZ INFORMATION AUTO
ACTION TITLE AUTO
PRESET LABEL AUTO
ALARM INPUT AUTO
BACK
EXIT
This menu defines Enable/Disable of OSD display on Main Screen. If an item is set to be
AUTO, the item is displayed only when the value of it is changed.
Camera ID [ON/OFF]
PTZ Information [ON/OFF/AUTO]
Action Title [ON/OFF/AUTO]
Preset Label [ON/OFF/AUTO]
Alarm Input [ON/OFF/AUTO]
COMPASS DIRECTION SETUP
SET NORTH DIRECTION
------------------------
MOVE TO TARGET POSITION
[NEAR:SAVE /FAR:CANCEL
Set North to assign compass direction as criteria. Move camera and press NEAR button
to save.