Edit preset scene, Edit preset label – OpenEye CM-410 User Manual

Page 38

28561AA

EDIT PRESET SCENE

EDIT SCENE - PRESET 1
------------------------

MOVE TO TARGET POSITION
[NEAR:SAVE /FAR:CANCEL]

1. Using Joystick, move camera to desired position.

2. By pressing NEAR key, save current PTZ data.

3. Press FAR key to cancel.

EDIT PRESET LABEL

EDIT LABEL - PRESET 1
------------------------
[ ]
----------
1234567890 OK
ABCDEFGHIJ CANCEL
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------

1. Edits label to show on monitor when camera arrives at presets. In Edit Label menu,

a reverse rectangle is the cursor. As soon as alphabetic selection is complete, the
cursor will move to the next digit.

2. Using Left/Right/Up/Down of joystick, move to an appropriate character from the

Character set. To choose the character, press the NEAR key.

3. If you want to use blank, choose Space character (" "). If you want to delete a

character before, use back space character ("

←").

4. When you complete the Label editing, move cursor to "OK" and press NEAR key to

save completed label. To abort current change, move cursor to "Cancel" and press
NEAR key.