OpenEye CM-410 - Manual (Page 30)

20 28561AA
OTHER FUNCTIONS
Power Up Action This function enables the camera to resume the last action executed before power down. Most actions
such as Preset, Pattern, Swing and Group are available for this function, but Jog actions cannot be
resumed.
Auto Flip If the tilt angle arrives at the top of tilt orbit (90°), zoom module camera will keep moving in the
opposite tilt direction (180°) to keep tracing targets. As soon as zoom module camera passes through
the top of tilt direction (90°), images will be reversed automatically and the F symbol appears on
screen. If this function is set to OFF, tilt movement range is 0 ~ 95°.
Parking Action This function sets the camera to a specific position automatically if operator doesn’t operate the
controller for a while. The Park Time can be defined as an interval from 1 minute to 4 hours.
Alarm Input 4 Alarm Inputs are used. If an external sensor is activated, the camera can be set to move to
corresponding preset position. Note: the latest alarm input is in effect if multiple sensors are activated.
Privacy Zone Mask To protect privacy, max. 4 Privacy Masks can be created in arbitrary locations to hide objects such as
windows, shops or private houses. With the Spherical Coordinates system, a powerful Privacy Zone
Mask function is available.
GLOBAL/LOCAL
Image Setup WB (White Balance) and AE (Auto Exposure) can be set up independently for each preset. There are
2 modes, "Global" mode & "Local" mode. The Global mode means that WB or AE can be set up
simultaneously for all presets in the "ZOOM CAMERA SETUP" menu. The Local mode means that
WB or AE can be set up independently or separately for each preset in each preset setup menu. Each
Local WB/AE value will activate correspondingly as the camera arrives at each preset location.
During jog operation, Global WB/AE values should be applied. All Local WB/AE values will not change
although Global WB/AE value changes.
SemiAuto Focus Automatically selects focus mode from Manual Focus or Auto Focus depending on type of operation.
Manual Focus mode activates in preset operation and Auto Focus mode activates during jog
operation. In Manual mode, Focus data for each preset is memorized in advance, and the camera
calls focus data for corresponding presets as soon as it arrives at a preset. This method shortens
focus times.
Focus mode changes to Auto Focus mode automatically when jog operation starts.