OpenEye CM-410 - Manual (Page 36)

26 28561AA
MOTION SETUP
MOTION SETUP
------------------------
MOTION LOCK OFF
PWR UP ACTION ON
AUTO FLIP ON
JOG MAX SPEED 120/SEC
JOG DIRECTION INVERSE
FRZ IN PRESET OFF
BACK
EXIT
Setup the general functions of Pan/Tilt motions.
Motion Lock [ON/OFF]
If Motion Lock is set to ON, it is impossible to set up and
delete Preset, Swing, Pattern and Group. It is only possible
to run these functions. To set up and delete these
functions, enter into OSD menu.
Power Up Action [ON/OFF]
Refer to “Other Functions" section.
Auto Flip [ON/OFF]
Refer to “Other Functions" section.
Jog Max Speed [1 °/sec ~360°/sec]
Sets maximum jog speed. Jog speed is inversely
proportional to zoom magnification. As zoom magnification
goes up, pan/tilt speed goes down.
Jog Direction [INVERSE/NORMAL]
If you set this to ‘Inverse’, the view on the screen will move
in the same direction as jog tilt. If ‘Normal’ is selected, the
view on the screen will move in the opposite direction.
Freeze in Preset [ON/OFF]
At start point of preset movement, camera will freeze the
image of start point. Camera keeps displaying the image of
start point during preset movement and does not display
the images received during preset movement. As soon as
camera stops at preset end point, camera will display live
images received at the preset end point.
Availability of this function will vary by model.
PARKING ACTION SETUP
PARKING ACTION SETUP
------------------------
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
If Park Enable is set to ON, camera runs assigned function automatically if there is no
PTZ command during assigned "Wait Time".
Park Enable [ON/OFF]
Wait Time [1 minute ~ 4 hour]
The time is displayed with "hh:mm:ss" format and can be
changed in 1 min units.
Park Action [HOME/PRESET/PATTERN/SWING/GROUP]
HOME
Camera moves to home position if there is no PTZ
command during assigned "Wait Time".