OpenEye CM-814 - Manual (Page 63)

30101AB 63
Preset Go
To move the camera view to a specified Preset position:
•
Select the Preset Point from the list under Preset Go. The camera will move to the
target position.
Cruise Programming
The camera supports up to eight Cruise Paths.
Cruise Setting
To create a Cruise Path:
1. Select a path number from the Cruise Path list.
2. Move the cursor to the live view pane, and move the camera to a desired view using
the PTZ controls for the start point of a Cruise Path.
3. Click Set next to Record Start and start programming the Cruise Path via the PTZ
controls.
4. When you have finished the path, click Set next to Record End. The Cruise Path
will be automatically recorded.