OpenEye CM-814 - Manual (Page 31)

30101AB 31
Wall Mounting with Corner Mount
The corner mount must be used in conjunction with the wall mount bracket.
Items Needed:
•
Dome Camera
•
Wall Mount Bracket Accessory
•
Corner Mounting Plate
•
Waterproof Gasket (supplied)
•
Screws and Anchors
appropriate for the mounting
surface (not supplied)
Tools Needed:
•
Drill
•
Screwdriver
Installation Steps:
1. Cut a cable access hole on
the wall. Cables can also
be threaded through the
cable entry knockout on the
bracket if desired.
2. Secure the Corner Mount
plate on the corner wall with
the appropriate screws and
screw anchors.
3. Attach the Wall Mount
Bracket to the corner mount
plate with the supplied
screws and washers.
4. Thread the cables through Wall Mount Bracket and the top holder.
5. Block the cable entry hole with the supplied sponge.
6. Attach the Waterproof Gasket to the Wall Mount Bracket.
7. Attach the top holder to the Wall Mount Bracket with the supplied screws and
washers and adjust the gasket to the junction of the Wall Mount Bracket and the top
holder.
8. Connect the cables to the dome camera.
9. Attach the dome to the top holder and secure them with the supplied screw.