OpenEye CM-814 - Manual (Page 21)

30101AB 21
Cable Wiring and Connection
You may need to connect cable wiring when:
•
Connecting self-provided cords to the connector housing instead of using the
supplied data cable
•
Connecting alarm input and output devices.
The following table illustrates the proper way to wire cords into the connector housing.
1. Insert the terminal into the pin holes
on the connector housing, with the
hook outward, as indicated in the
figure.
1a. To unlock the terminal, press the
hook, as indicated in the figure, with
a proper tool and pull it out gently.
2. Connect the 22-pin connector to the
dome camera.