OpenEye CM-814 - Manual (Page 19)

30101AB 19
Dome Cable Definition and Requirements
For operation, the IP dome camera requires a network cable to carry the video signals to
the remote viewing site and a power cable to power the dome.
Cable Requirements
For operation, the CM-814 IP camera requires AC 24V power to the dome.
Power Wire Length Specifications
Wire
Gauge Maximum
Distance Wire
Gauge Maximum
Distance
22 27 feet 14 175 feet
20 44 feet 12 279 feet
18 69 feet 10 444 feet
16 110 feet
Note Ensure that the power supply corresponds with the dome’s power requirement
or the camera may be damaged. Contact a qualified maintenance engineer
with any problems.
22-Pin Data Cable
Note Be careful not to pull the cables improperly during installation. OpenEye
suggests that you fasten the cables after installation is complete.
Note When wiring the power cable, make sure the Ground wire is inserted into the
mid-pin of the terminal block.