OpenEye CM-814 - Manual (Page 34)

34
Changing the Network Type
You can change the network type from Static IP to DHCP easily from the list of
connected IP devices. To change the network type to DCHP:
1. On the list of connected IP devices locate the desired camera and record the MAC
address,
2. Right-click the camera row and select Network Setup.
3. Select the DCHP option on the Network Setup window and then click Apply.
4. Click OK to acknowledge the change.
5. After one minute, click Device Search to search for all connected IP devices.
6. Locate the camera using the MAC address recorded earlier and double click the
camera row.
7. Type the Username and Password to access the camera.
SETUP & CONFIGURATION
CONNECTING TO THE CAMERA
1. Locate the camera on the IP Finder list.
2. Double-click the camera to open the Viewer software in your web browser.
3. Log in to the camera with the appropriate User Name and Password.
Note The default User name is Admin and the default Password is1234. The
username and password are case sensitive. OpenEye recommends you
change the Admin password for security reasons.
Administrator/User Privileges
The Administrator account has the authority to configure the IP camera and authorize
users’ access to the camera. The User accounts have access to the camera with limited
authority.