OpenEye CM-814 - Manual (Page 5)

30101AB 5
Installation and Storage
•
Install electricity wiring carefully. Please note that input electricity to the unit is at
tolerance of DC 12V/AC 24V ± 10%. The camera is capable of surge protection;
ensure AC power model unit is grounded appropriately against damage by
heavy current or electric shock.
•
Do not install the camera in areas of extreme temperatures in excess of the
allowable range. (-50°C ~50°C / -58°F ~ 122°F)
•
Avoid installing in humid or dusty places. The relative humidity must be below
90%.
•
Avoid installing in places where radiation is present.
•
Avoid installing in places where there are strong magnetic fields and electric
signals.
•
Avoid installing in places where the camera would be subject to strong
vibrations.
•
Never face the camera toward the sun. Do not aim at bright objects. Whether
the camera is in use or not, never aim it at the sun or other extremely bright
objects. Otherwise the camera may be smeared and damaged.
Regulation
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste in accordance with
Directive 2002/96/EC. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment. By proper waste handling of this product you
ensure that it has no negative consequences for the environment
and human health, which could otherwise be caused if this product
is thrown into the garbage bin. The recycling of materials will help to
conserve natural resources.
For more details information about recycling of this product, please
contact your local city office, your household waste disposal service
or the shop where you purchased the product.
Compliance is evidenced by written declaration from our suppliers,
assuring that any potential trace contamination levels of restricted
substances are below the maximum level set by EU Directive
2002/95/EC, or are exempted due to their application.