OpenEye CM-814 User Manual
Page 37
30101AB
37
Optical/Digital Zoom Control
In Normal View display mode, you can zoom in/out by first moving the cursor to the live
video pane and rotating the mouse wheel. Digital zoom is only available when the
function is activated and set up on the Camera-Misc1 screen under the PTZ tab; see the
Camera—Miscellaneous Setups Menu 1 section for details. When the camera reaches
the limit of its optical range, it will automatically switch to digital zoom.
Talk
The Talk function allows the local site talks to the remote site. Please refer to the
Security: Add user > Talk/Listen section for further details. This function is only available
to Users who have been granted this privilege by the Administrator.
Snapshot
Click the Snapshot button, and a JPEG snapshots will automatically be saved in the
appointed place. The default place of saving snapshots is: C:\. To change the storage
location, please refer to the Snapshot section for further details.
Note
If you are using Windows Vista or 7, you will need to change the Snapshot
location. Windows UAC does not allow internet programs to write directly to
C:\ for security reasons.
Zoom Adjustment
Click on the wide/tele buttons to control zoom in/out. Move the cursor to the zoom
adjustment bar and click the desired position to change the room ratio.
Focus Adjustment
Auto Focus (Continuous AF):
Click auto to enable AF mode. In this mode, the camera will automatically and
continuously adjust focus regardless of zoom changes or any view changes. The Focus
status will also be displayed above the live video pane as shown below.