Nortec SE Series - Manual (Page 9)

Introduction | 6
Outdoor Model (SETC Only)
The outdoor model of the SETC provides a weatherproof enclosure that allows the SETC to be
installed on rooftops in moderately cool climates. Refer to the SETC installation manual that is
provided with the outdoor model to insure proper installation.
Options and Accessories
Nortec provides a complete line of options and accessories for every humidification application.
The following options and accessories are available and may have been delivered with your
SETC/P humidifier. Refer to the installation instructions that came with the accessories for their
proper installation and operation.
Table 2: Options and Accessories
Option / Accessory Used For
Freeze Protection Package (SETC Only) Emptying the tank in case of fault or power failure to prevent
freezing. (Factory installed)
Floor Stand Supporting the humidifier 27 inches above the floor (height can be
reduced by cutting legs of floor stand). (field assembled)
Ceiling Mounting Kit (SE50 Only) Providing a drain pan and support brackets for mounting an SE50
unit from the ceiling.
Steam Distributors Adding steam into air ducts
Remote Blower Pack Adding steam into a space remote from the humidifier.
SAM-e Steam Distribution Manifold Adding steam into air ducts where short absorption is required.
Digital or Analog Control Humidistats Controlling the output of the humidifier based on sensed RH (can
be mounted in the space being humidified or in the duct).
Digital RH Transducers Communicating RH in a space or duct to the humidifier
Digital or Analog High Limit Humidistats Preventing over humidification in a duct by shutting down or
throttling down the humidifier when duct RH gets high.
Air Proving Switches Insuring humidification only occurs when air is moving in a duct.
Nortec LINKS 2 (SETC Only) Connecting the humidifier to a building management interface.
hardware allows control of the humidifier via BACnet, Lonworks,
Johnson N2, or Modbus.
Nortec OnLine (SETC Only) User and factory monitoring and configuration of the humidifier via
the internet.