Nortec SE Series - Manual (Page 15)

Installation | 12
Mounting on Optional Stand
The optional SE floor stand positions the SE humidifier at a convenient working height and
provides additional clearances for sloping drains. The stand must be assembled at site.

Assemble the stand according to the instructions that are provided with it.

Ensure the stand and humidifier are installed on a level surface

Permanently secure the stand to the floor via the holes in the leg support plates following
any local codes or regulations.
Figure 7: Mounting on Optional Stand
Note: The humidifier must be secured to the stand (hardware provided) and the stand
must be secured to the floor (hardware by others).
Center support only
present on SE 525
and larger.
Fasten SE humidifier
to stand with bolts,
lock washers, and nuts
provided. Tighten
to 200 in-lb (22.6 Nm).
Mount stand on level surface
Ensure humidifier is Level
Secure stand to floor
four places.
(hardware by others)
Note: