Nortec SE Series - Manual (Page 56)

53 | Operation
(User Defined Settings Continued)
Time
Sets the time of day. Selecting Hour
or Minute takes the user to a
submenu that allows the value to be
increased or decreased by pressing
u/down arrows. Set accepts the
setting.
Unit
Sets the units of measure to use for
display of steam output to either
lb/hr or kg/hr. (Default = lb/hr)
Language
Sets the language to use for the
software menu. (Default = English)
Contrast
Adjusts the contrast of the LCD
display to improve visibility under
different lighting conditions. (Default
= 10)
Leak check
Sets whether the controller should
monitor tank level during periods of
no demand. If on a fault will be
generated if water level drops with
no demand. (Default = Off)
Control Setting
Control Setting allow you to set the type of external controls the humidifier is connected to. In
most cases the SETC humidifier is factory configured to operate with the external controls that
were specified for the site. Press Set while highlighting Control Setting in the Main Menu.
Time : 13:22
Time
Hour
: 13
Minute : 22
Menu Set
Hour : 13
Unit : lb/hr
Unit Steam
lb/hr
lb/hr
kg/hr
Menu Set
lb/hr
Language : English
Language
English
English
French
Dutch
German
Menu Set
English
Contrast : 10
Contrast
10
10
Menu Set
10
Leak Ck : Off
Leak Check
Off
Off
On
Menu Set
Off
CAUTION: Improper control configuration can result in over humidifying which can
result in damage to property.