Measurement Computing DAC488 v.1 - Manual (Page 3)

DAC488 User’s Manual i
Introduction to this Manual
This manual covers the setup and operation of the DAC488/4 and the DAC488/2 digital-to-analog converter
systems. This manual is organized as follows:
•
Chapter 1 - DAC488 Overview gives an overview of the basic features of a DAC488 system. DAC488
accessories and specifications are also provided.
•
Chapter 2 - DAC488 Setup explains in detail the various hardware features of the DAC488 unit.
•
Chapter 3 - DAC488 Power & Assembly provides detailed instructions on line-voltage selection and
fuse replacement, rack-mount and bench-top installation, as well as power-up activation.
•
Chapter 4 - DAC488 Operation explains the DAC488 theory of operation. Descriptions of the
DAC488 command groups, triggering, internal buffer, control modes, as well as IEEE 488 bus support,
are provided.
•
Chapter 5 - IEEE 488 Background describes the history and the basic concepts of IEEE 488
operation, including the various IEEE 488 bus commands and bus lines.
•
Chapter 6 - DAC488 Calibration explains the manual and automatic procedures for calibrating the
DAC488 unit.
•
Chapter 7 - DAC488 Commands discusses the entire command set covering the DAC488/4 and
DAC488/2 units. The command syntax, groups, and reference are provided. The description format of
the individual commands includes the command type, syntax, description, and an example program
excerpt.
•
Chapter 8 - Troubleshooting provides a reference for possible solutions to technical problems. Before
calling for technical assistance, refer to this chapter.
•
The Appendix provides background information concerning the IEEE 488 bus, the serial bus, and
ASCII controls.
•
The Index provides a comprehensive alphabetical listing of the main terms and topics in this manual.
Also, the Abbreviations on the last pages of this manual, provides an overall list of abbreviations,
including acronyms and ASCII control codes, as an additional reference for this manual and for other
related literature.
CAUTION CAUTION CAUTION CAUTION
Using this equipment in ways other than described in this manual can cause personal
injury or equipment damage. Before setting up and using your equipment, you should
read all documentation that covers your system. Pay special attention to cautions and
warnings formatted like this one.