Measurement Computing DAC488 v.1 - Manual (Page 23)

DAC488 User’s Manual DAC488 Power & Assembly 17
Rack-Mount & Bench-Top Assembly
The DAC488 includes accessories for rack-mount or bench-top assembly.
Rack Mount
If rack-mount assembly is required, remove the two plastic screws from the pre-drilled holes on each side of
the unit. Since the unit can be mounted with the front or rear panel facing the front of the rack fixture,
remove only those screws from the set of holes that will be toward the front of the rack. Attach the two rack
ears using the enclosed screws.
Bench Top
If bench-top assembly is required, install the self-adhesive rubber feet on the bottom of the unit
approximately one inch from each corner.